2026 Catalog - Flipbook - Page 160
Plate
Clamps
Hoist
Rings
Lift-All
Hoists
Cargo
Control
Mesh
Slings
Rigging
Hardware
Chain
Slings
Wire
Rope
Sling
Protection
Round
Slings
Web
Slings
General
Information
Custom Devices
Custom Engineered Devices
BASIC INFORMATION
Lift-All can provide a unique engineered device for your production requirements. Our custom devices range
from large capacity beams to small S-Hooks or J-Hooks.
Features and Bene昀椀ts
•
•
•
•
•
•
Speci昀椀cally designed equipment with safety in mind.
All equipment conforms to highest engineering standards and meets or exceeds government and industry
regulations (ASME B30.20).
Helps eliminate employee fatigue - raises morale and quality of work.
Productivity improves through e昀케ciency when using properly designed lifting devices.
Equipment can be designed to prevent costly load damage.
Rugged materials and construction provide long useful life.
Inspection Criteria for Lifting Devices
Visually inspect lifting device and slings prior to each
lift. Have a competent person record inspection a
minimum of once a year. Follow all warnings and care/
use instructions supplied with the device. Check the
following and correct before use:
•
•
Structural deformation, cracks, excessive wear.
•
Inoperable mechanisms including automatic hold
or release devices.
•
•
Loose bolts or fasteners.
•
Excessive wear of friction pads, linkage or other
mechanical parts.
•
Excessive wear of hoist hooking points and load
support clevises or pins.
Loose or missing guards, fasteners, covers, stops
or name plates.
Safe Operating Practices
•
•
•
Use only per ASME B30.20.
•
•
Never lift over people and never ride the load.
•
Instruct the operator on correct lifting practices
including proper storage, load distribution, use of
associated slings, temperature considerations,
avoidance of obstructions, acceleration, side pulls
and angle of lift. Refer to the General Information
section of this catalog more information.
Cracked or worn gears, pulleys, sheaves,
sprockets, bearings and chains.
Check name plate to assure proper lifting capacity.
Perform a test load at a su昀케cient distance to
assure that the load is supported properly by
the lifter. Then inspect the lifter for defects and
deformation.
For proper use of slings with lifting devices refer
to ASME B30.9 and appropriate section of this
catalog.
Lifting
Devices
How to Order
1. Review and understand the HELP section in this catalog.
2. Copy appropriate drawing from the following pages or download from our website www.lift-all.com under
Products/Lifting Devices/Custom Lifting Devices.
3. Enter the information scan and email to: customerservice@lift-all.com. For assistance call Lift-All Custom
Service at 800-909-1964.
4. Our engineering drawing will be sent to you for approval and purchase order. A fee may apply.
158
