2026 Catalog - Flipbook - Page 115
Roughneck™ Mesh Slings
General
Information
CHAIN MESH SLINGS
Specialty slings for rugged applications
Features and Bene昀椀ts
Each sling is permanently stamped with
capacity and serial number for traceability.
•
•
Steel construction resists abrasion and cutting.
Chain diameter
in inches
Each sling proof-tested and certi昀椀ed.
Width of mesh helps to balance and control
loads.
•
End 昀椀ttings accommodate most large crane
hooks.
Sling
Protection
1 = Type 1 (Triangle/Choker)
2 = Type 2 (Triangle/Triangle)
Saves Time
•
Example Order Code:
732 1 3 MX 10
Round
Slings
•
Number of parts of chain
See chart below for availability.
Wire
Rope
Saves Money
•
•
Repairable.
•
Low stretch and wide-bearing area distributes
load to help avoid damage.
Sling 昀氀exibility allows fast and easy connection
to load.
Discoloration from excessive temperature.
•
•
Visible distortion or deformation of 昀椀tting.
•
Cracked end 昀椀tting.
Chain links and attachments won’t hinge freely
with adjacent links.
15% reduction of original cross-sectional area
of metal at any point of either end 昀椀tting.
For more details, see inspection criteria in the
Chain Sling section of this catalog.
Vertical
5,000
6,700
8,400
10,000
8,400
11,000
14,000
16,800
17,000
22,700
28,400
34,000
19,200
28,800
38,400
Choker
5,000
6,700
8,400
10,000
8,400
11,000
14,000
16,800
-
Basket
10,000
13,400
16,800
20,000
16,800
22,000
28,000
33,600
34,000
45,400
56,800
68,000
38,400
57,600
76,800
•
Rated capacities of chain mesh are reduced at
temperatures above 400°F.
•
Store in clean, dry area to avoid corrosive
action.
+
All sling users must read and understand the safety bulletin
provided with each sling.
Lifting
Devices
Environmental Considerations
Plate
Clamps
•
•
Rated Capacity (lbs.)*
Hoist
Rings
Wear, nicks, cracks, breaks, gouges,
stretch, bends or weld spatter on chain or
attachments.
Sling
Width
(in.)
1-1/2
2
2-1/2
3
2-1/8
2-3/4
3-3/8
4
3-1/4
4-3/8
5-3/8
6-1/2
3
4-1/2
6
Lift-All
Hoists
•
Chain Parts
Size
of
(in.) Chain
3
4
7/32
5
6
3
4
9/32
5
6
3
4
3/8
5
6
2
1/2
3
4
Cargo
Control
Remove sling from service if any of the following
conditions are visible:
Sling length (ft.)
Use pull to pull length
Mesh
Slings
Inspection Criteria+ for Roughneck Chain Mesh
Slings
‘MX’
Rigging
Hardware
Alloy steel end 昀椀ttings coupled with G100
chain resist abrasion and cutting for greater
sling life.
Chain
Slings
•
Web
Slings
HOW TO ORDER CHAIN MESH SLINGS
Promotes Safety
*
WARNING Do not exceed rated capacities. Sling capacity
decreases as the angle from horizontal decreases. Slings should not
be used at angles of less than 30°. Refer to E昀昀ect of Angle chart in
General Information section of this catalog.
113
