2026 Catalog - Flipbook - Page 106
CHAIN SLING HARDWARE
Chain Sling Eye Hook – Code S
Cargo
Control
Quenched and tempered alloy steel.
Fatigue rated.
100% proof-tested.
Durable powder-coated 昀椀nish.
1
Rated Capacity also referred to as Working Load Limit.
Latches are not included on domestic hooks. If latches are required, you must specify when ordering.
Part Number 732DESH 932DESH 38DESH 12DESH 58DESH 34DESH 78G8ESH 1G8ESH 114G8ESH
Latch Kit
732LK
932LK
38LK
12LK
58LK
34LK
78LK
1LK
114LK
Foundry Hook – Code F
•
For use with both G80
and G100 chain.
•
•
Throat opening to 6".
Quenched and
tempered alloy steel.
•
•
•
100% proof-tested.
•
Design factor 4:1.
Fatigue rated.
Durable powder-coated
昀椀nish.
Dimensions (in.)
Wgt.
Chain 1Rated
Part
Ea.
Grade Size Cap.*
Number
B
D
E
G
H
I
K
L
M
N
O
R (lbs.)
(in.) (lbs.)
100
9/32 4,300 932DEFH 1.56 4.73 2.50 6.45 0.47 1.00 1.56 0.63 4.75 2.50 1.23 0.25 2.4
100
3/8
8,800 38DEFH 2.00 5.72 3.00 7.88 0.63 1.27 1.88 0.80 5.77 3.00 1.50 0.31 4.5
100
1/2 15,000 12DEFH 2.50 6.74 3.50 9.38 0.75 1.50 2.22 1.00 6.88 3.50 1.75 0.38 7.1
100
5/8 22,600 58DEFH 3.00 7.79 4.00 10.97 0.88 1.81 2.63 1.13 8.06 4.00 2.03 0.44 11.6
100
3/4 35,300 34DEFH 3.50 9.07 4.50 12.81 1.00 2.20 3.00 1.50 9.25 4.50 2.56 0.50 20
80
7/8 34,200 78G8EFH 4.00 10.09 5.00 14.23 1.13 2.25 3.38 1.70 10.38 5.00 2.78 0.56 26
80
1
47,700 1G8EFH 4.50 11.55 5.50 16.17 1.29 2.63 3.75 2.13 11.56 5.50 3.45 0.62 36.8
80
1-1/4 72,300 114G8EFH 5.13 12.87 6.00 18.03 1.38 3.17 4.25 2.33 12.88 6.00 3.81 0.75 58.4
Plate
Clamps
Lifting
Devices
1
Rated Capacity also referred to as Working Load Limit.
*
104
Shown with
optional latch.
Design factor 4:1.
Dimensions (in.)
Wgt.
Chain 1Rated
Part
Ea.
Grade Size Cap.*
Number
B
D
E
G
H
I
K
L
M
N
O
P
S (lbs.)
(in.) (lbs.)
100 7/32 2,700 732DESH 1.50 3.04 1.30 5.06 0.38 0.66 1.47 0.75 3.75 0.97 0.99 0.94 0.99 0.80
100 9/32 4,300 932DESH 1.65 3.48 1.50 5.25 0.45 0.75 1.75 0.72 3.75 1.19 1.21 1.05 1.10 1.10
100
3/8 8,800 38DESH 2.06 4.33 1.88 6.66 0.58 0.97 2.19 0.91 4.77 1.44 1.46 1.31 1.29 1.90
100
1/2 15,000 12DESH 2.63 5.50 2.25 8.16 0.77 1.10 2.56 1.09 5.67 1.78 1.91 1.68 1.63 4.50
100
5/8 22,600 58DESH 3.06 6.23 2.63 9.63 0.89 1.46 2.62 1.31 6.50 2.03 2.20 2.23 1.69 7.30
100
3/4 35,300 34DESH 3.50 7.82 3.00 11.38 1.00 1.69 3.47 1.50 7.81 2.50 2.82 2.58 2.31 11.40
80
7/8 34,200 78G8ESH 3.88 8.59 3.38 12.72 1.09 1.94 3.88 1.69 8.75 2.78 3.22 2.84 2.38 18.10
80
1 47,700 1G8ESH 4.31 9.59 4.00 14.23 1.22 2.14 4.25 1.88 9.88 3.13 3.55 3.09 2.88 22.60
80
1-1/4 72,300 114G8ESH 5.31 11.56 4.66 17.00 1.50 2.62 4.64 2.31 11.50 3.88 4.25 3.89 3.41 47.00
Hoist
Rings
Lift-All
Hoists
For use with both G80 and G100 chain.
•
•
•
•
•
•
Mesh
Slings
Rigging
Hardware
Chain
Slings
Wire
Rope
Sling
Protection
Round
Slings
Web
Slings
General
Information
Rigging Hardware
WARNING Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Do not use slings at
angles of less than 30°. Refer to the E昀昀ect of Angle chart found in the General Information section of this catalog.
