2026 Catalog - Flipbook - Page 105
Rigging Hardware
General
Information
SLING HARDWARE
Eye Latchlok Hooks
Heavy-duty latch with lock
prevents accidental opening.
•
Design factor 4:1 for chain
slings.
•
•
Drop forged alloy steel.
•
Large eye design for use with
G80 and G100 chain.
•
•
100% proof-tested.
Design factor 5:1 for wire rope
slings.
Meets ASTM A952 standards.
1
9/32
3/8
1/2
5/8
932G10ELLH
38G10ELLH
12G10ELLH
58G10ELLH
A
M
1.09 537
1.36 6.65
1.57 8.79
2.00 10.37
P
D
F
H
K
Weight
Each
(lbs.)
0.88
1.07
1.58
1.97
3.77
4.74
6.26
7.37
1.64
2.27
2.91
3.22
0.47
0.59
0.80
1.03
0.91
1.15
1.47
1.85
2.50
4.74
10.00
16.00
Chain
Slings
Note: For welded 7/32" chain sling use 9/32" eye latchlok hook. 1 Rated Capacity also referred to as Working Load Limit.
Swivel Eye Latchlok Hooks with Bushings
Rigging
Hardware
Hook swivels beneath the eye.
Heavy-duty latch with lock prevents accidental opening.
Durable powder-coated 昀椀nish.
Positive locking hook.
Mesh
Slings
•
•
•
•
•
Design factor 5:1.
1
932G10SLLH
38G10SLLH
12G10SLLH
58G10SLLH
9/32
3/8
1/2
5/8
Rated Capacity
Dimensions (in.)
Tons
lbs.
H
M
P
D
F
A
B
K
1.7
3.5
6.0
9.0
3,400
7,000
12,000
18,000
0.62
0.77
0.93
1.00
7.17
8.73
11.18
13.35
0.88
1.07
1.58
1.97
3.77
4.76
6.26
7.37
1.64
2.26
2.91
3.22
1.50
1.75
1.00
2.75
1.33
1.63
1.76
2.38
0.91
1.15
1.47
1.85
Weight
Each
(lbs.)
3.5
4.8
10.6
17.0
USING LATCHLOK HOOKS SAFELY
•
Keep body and other objects clear of the latch
when closing to avoid the pinch point.
•
Make certain that the latch does not support any
part of the load.
•
•
Do not side load or tip load hook.
When lifting, make certain that the load is 昀椀rmly
seated in the base (bowl) of the hook.
•
Inspect hook and latch periodically. If the hook or
latch is damaged or if the latch fails to interlock
with the tip, the hook should be removed from
service.
•
•
•
*
Do not exceed the working load limit.
Do not use if the hook is visibly distorted,
damaged, or worn.
User should be properly trained to understand
safe rigging practices.
Lifting
Devices
Do not apply load unless latch and hook are
completely closed and locked.
Plate
Clamps
•
Hoist
Rings
Note: A swivel hook with a bearing design is also available. The bearing design allows the hook to rotate freely while the load is applied.
Rated Capacity also referred to as Working Load Limit.
1
Lift-All
Hoists
Chain
Size
Cargo
Control
Part
Number
Wire
Rope
Part
Number
Dimensions (in.)
Sling
Protection
Chain
Size
Rated Capacity
5:1 Design
4:1 Design
Factor
Factor
Tons
lbs.
lbs.
1.7
3,400
4,300
3.5
7,000
8,800
6.0
12,000
15,000
9.0
18,000
22,600
Round
Slings
•
Durable powder-coated
昀椀nish.
Web
Slings
•
WARNING Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Do not use slings at
angles of less than 30°. Refer to the E昀昀ect of Angle chart found in the General Information section of this catalog.
103
